원하시는 제품명을 입력해주세요.
최근 검색어
최근 검색어가 없습니다.
CTA408
THE COMPACT SOLUTION – MINIATURIZATION NEVER QUITE MADE IT TO COPLAND
There is nothing like an excellent tube amplifier. An amplifier that simultaneously offer a midrange that is open and clear, highs with an unconstrained mobility and acceleration, and a deep, tight and free flowing bass reproduction.
The CTA408 Integrated Amplifier is intended for those who prefer the ease of a single chassis amplification, still wanting the performance of separates. It offers such amenities as separate MC and MM phono inputs, Monitoring in/outputs, Headphone amplifier and a startup procedure that vastly prolongs the tube life.
Inside the CTA408.
* Driver stage tubes supported by MOSFET circuitry.
* Numerous individual power supplies, designed to operate with constant power, thereby isolating power stage fluctuations from entering the input stages and eliminating reverse modulation towards the AC supply grid.
* Dedicated Class A headphone amplifier, (speaker output mutes on headphone insertion)
* Excellent J-FET- Phono-amplifier. Active RIAA equalization employing more than one hundred discrete components inside a noise-shielding box of its own.
* The output transformers are Copland in-house design, fine-tuned for optimal power bandwidth. The massive core size of the transformers prevents core saturation, and they are able to transfer full power well below 20Hz to the loudspeakers with a minimum of phase shift. Multiple layers of interleaving wires ensures a superb linearity. The extended high frequency performance reduces the requirements for internal lag compensation after the amplifiers 15dB negative feedback loop is closed.
* The amplifier power plant is based on the KT150 power valves. These valves are a new variant of the legendary 6550/KT88 and in the CTA408, they surely demonstrate that the everlasting sound qualities of tubes can be extended into regions nowadays dominated by solid stage designs.
CTA408 Specifications
Output power:2*75W into 3 ohms or 8 ohms load.
Nominal speaker impedance: 4 & 8 ohms
Line input impedance: 50 K ohms
Phono input impedance: 47 K ohms (MM) / 50, 100, 470 Ohms (MC)
Line Inputs sensitivity: 250 mV
Phono sensitivity: 3.0 mV (MM) / 0.26 mV (MC)
Frequency response: 5 Hz - 100 kHz -3dB
T.H.D: Better than 0.9 %
Signal / noise IHF-A): Better than 90dB
Phase: Non-Inverting
Global Feedback: 15 dB
Headphone amplifier Section:
Output Impedance: 9 ohms
Gain: 17.5 dB
Frequency response: 10 Hz – 200 kHz / -3dB
Vacuum tubes: 4 pcs. KT150 2 pcs.12BH7 2 pcs. 6072A / 12AY7
Power consumption: Max.400 W
Dimensions: 435mm (H) x 220mm (H) x 460mm (D)
Shipping weight: 26 Kg.
- 상품 택(tag)제거 또는 개봉으로 상품 가치 훼손 시에는 상품수령후 7일 이내라도 교환 및 반품이 불가능합니다.
- 상품의 포장을 뜯었거나 사용 및 초기 수령한 상태와 동일하지 않는 경우 교환 및 반품이 불가능 합니다.
- 제품의 문제가 있을시 반드시 02-3273-5928 A/S 담당자와 통화를 해야 반품 및 교환이 가능합니다.
- 고객 변심에 의한 교환, 반품은 고객께서 배송비를 부담하셔야 합니다(제품의 하자,배송오류는 제외)
- 일부 상품은 신모델 출시, 부품가격 변동 등 제조사 사정으로 가격이 변동될 수 있습니다.
- 일부 특가 상품의 경우, 인수 후에는 제품 하자나 오배송의 경우를 제외한 고객님의 단순변심에 의한 교환, 반품이 불가능할 수 있사오니, 각 상품의 상품상세정보를 꼭 참조하십시오.
- 상품 청약철회 가능기간은 상품 수령일로 부터 7일 이내 입니다.
- 제품의 포장을 뜯었거나 사용 및 초기 수령한 상태와 동일하지 않는 경우 환불/반품/교환이 불가능합니다.
- 소비자분쟁해결 기준(공정거래위원회 고시)에 따라 피해를 보상받을 수 있습니다.
- 각종 질문 및 문의사항은 언제든지 02-3273-5928로 전화주시면 됩니다.
- 모든 상품의 A/S는 공식 수입원(제조사)를 통해 받으실 수 있으시며, 접수는 직접 방문 또는 택배를 통해서 접수하시면 됩니다.
- 배송비 : 기본배송료는 3,000원 입니다. (도서,산간,오지 일부지역은 배송비가 추가될 수 있습니다) 50,000원 이상 구매시 무료배송입니다.
- 본 상품의 평균 배송일은 2~3일입니다.(입금 확인 후) 설치 상품의 경우 다소 늦어질수 있습니다.[배송예정일은 주문시점(주문순서)에 따른 유동성이 발생하므로 평균 배송일과는 차이가 발생할 수 있습니다.]
- 본 상품의 배송 가능일은 2~3일 입니다. 배송 가능일이란 본 상품을 주문 하신 고객님들께 상품 배송이 가능한 기간을 의미합니다. (단, 연휴 및 공휴일은 기간 계산시 제외하며 현금 주문일 경우 입금일 기준 입니다.)
상품이 장바구니에 담겼습니다.
바로 확인하시겠습니까?
상품이 찜 리스트에 담겼습니다.
바로 확인하시겠습니까?